TI 600-9 on-line thermal mass flow meter 


 Thermal Mass Flowmeter 
 Measurement (corrosive) gas and liquid 
 Diameter: 1 / 16 ", 1 / 8", 1 / 16 ", 1 / 4", 3 / 8 ", 1 / 2", 1 ", 2", 3 ", 4", 5 ", 6" 
 Flow Range: (Air) 0-300SLPM to 0-56 cubic meters / minute or greater 
 (Water)) 0-10LPM to 0-2650LPM or more 
 Accuracy: ± 0.5% FS or 2% of reading (whichever is the best value) 
 Repeatability: ± 0.2% reading 
 Range ratio: 100:1 (typical), 1000:1 (optional) 
 Response time :1-2 seconds (gas), 500 ms (liquid) 
 Material: 316 SS (standard), 316L,, Hastalloy B & C, Monel, Titanium, Tantalum, and Carpenter 20 (optional) 
 Maximum pressure: 410MPa (standard configuration), 8.3MPa (with 9,500 electronic modules) 
 Medium temperature range: -40 to +177 ℃ (standard), -156 to +593 ℃ (optional) 
 Output signal :4-20 mA (standard), 0-5 VD and RS-232/RS-485 (optional) 
 Interface: flange, Swagelok, NPT, VCR, VCO, Tri-clamp, etc. 
 Options: explosion, instantaneous and cumulative flow of local display, high and low alarm outputs, two-way flow, dual range, sensor and display electronic module separation